|
|
|
Grouper
 
Group: Forum Members
Last Login: Yesterday @ 7:12:07 PM
Posts: 621,
Visits: 1,871
|
|
| Tuna tubes work. I've seen them in action, first hand. Why wouldn't a similar rig for Cigar Minnows be the catsass for a kayak? Tuna calm down when inserted head first into the tubes and I am sure Cigar Minnows would do the same. I know how to rig the tubes and I guess mounting them would be dependent on the yak. Certainly you wouldn't have to reach behind you and dip out a fast moving baitfish that you couldn't see. The tubes and the associated plumbing would be cheap and simple. You'd need varying size flow restrictors so that the tube nearest the pump wouldn't hog all of the flow. Valves would work but would make the system larger and increase the cost a bunch. I'm sure I can handle the flow restrictor problem with simple drilled plates. Hole size could be determined before gluing anything. My concern is what pump to use. I don't see using a bilge pump because it would require mounting and would cause a lot of drag. I'd definitely want a low amperage pump that would run a long time off a tiny battery. Three hundred gph should take care of ten tubes, providing 1/2gpm each. The pump could sit in the tank well and take its suction through one of the scuppers. Any ideas?
Life is too short to catch little fish.
|
|
|
|
|
Snapper
Group: Forum Members
Last Login: Yesterday @ 9:23:24 AM
Posts: 461,
Visits: 1,771
|
|
| How many cigs per tube were you thinking?
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Yesterday @ 8:16:31 PM
Posts: 919,
Visits: 2,392
|
|
|
|
|
|
Snapper
Group: Forum Members
Last Login: Yesterday @ 9:23:24 AM
Posts: 461,
Visits: 1,771
|
|
|
|
|
|
Trigger
Group: Forum Members
Last Login: 10/12/2008 9:54:26 AM
Posts: 154,
Visits: 274
|
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Yesterday @ 7:12:07 PM
Posts: 621,
Visits: 1,871
|
|
| One minnow per tube. You can use 1" or 1-1/4" light wall pipe about 6" long for the individual tube. The tubes will come off Tees from a main header. Water goes in the bottom and overflows out the top. The minnows tail will be out of the water. You can't get by with an aquarium pump because they are 120V and I doubt if they have enough flow. A net (bait bag) causes far too much drag.
Life is too short to catch little fish.
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Yesterday @ 7:12:07 PM
Posts: 621,
Visits: 1,871
|
|
| I had a brainfart last night. The old "Light Bulb" flickered, came on and stayed on. I think I have this project licked. My idea is simple but the project might be a tiny bit complicated so I plan to do a dry run first. Do you think Cigar minnows and Spanish Sardines will fit in a piece of 1" light wall PVC pipe? I am certain 1-1/4" would work but the smaller the pipe, the less drag it will cause. For my use, I'll have to use 1-1/4 or 1-1/2" because I use large Threadfin Herring about 99% of the time. I'll probably make a 2" one for using Ladyfish for Snook in the winter.
Life is too short to catch little fish.
|
|
|
|
|
Snapper
Group: Forum Members
Last Login: Yesterday @ 6:22:13 AM
Posts: 308,
Visits: 4,111
|
|
captken (10/22/2008)
I had a brainfart last night. The old "Light Bulb" flickered, came on and stayed on. I think I have this project licked. My idea is simple but the project might be a tiny bit complicated so I plan to do a dry run first. Do you think Cigar minnows and Spanish Sardines will fit in a piece of 1" light wall PVC pipe? I am certain 1-1/4" would work but the smaller the pipe, the less drag it will cause. For my use, I'll have to use 1-1/4 or 1-1/2" because I use large Threadfin Herring about 99% of the time. I'll probably make a 2" one for using Ladyfish for Snook in the winter. They would fit but why would you want something for bait! Just use your livewell/cooler and leave them hooked up!
______________________________________Grady White 20 Overnighter 225 Ocean Pro named: Head Turner
|
|
|
| | |