|
|
|
Mingo
 
Group: Forum Members
Last Login: Yesterday @ 5:40:07 PM
Posts: 66,
Visits: 534
|
|
| My tilt/trim gauge has stopped working. Do the guages go bad or is it possibly a problem with corrosion on awire connection somewhere?
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Today @ 1:41:37 PM
Posts: 673,
Visits: 9,843
|
|
Both. Usually it is a sender or wire. Would help to know what were working with. (Merc, Mercruiser, Yamaha, etc.) You will get more suggestions on what to look for depending on the motor.
Davlor Marine, LLC mobile marine repairs, maintenance, and installations 850-777-7303 www.davlormarine.webs.com
|
|
|
|
|
Mingo
Group: Forum Members
Last Login: Yesterday @ 5:40:07 PM
Posts: 66,
Visits: 534
|
|
| It is a Yamaha 225 four stroke
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Today @ 1:41:37 PM
Posts: 673,
Visits: 9,843
|
|
Usually that trim sender sticks in the down position. Sometimes you can spray corrosion x, fluid film, corrosion block, or similar then work the sender and see if it will stay freed up. Sometimes there is no hope but to replace it. Usually freeing them is only temporary depending on how bad it is, so you may want to replace it for longevity.
Davlor Marine, LLC mobile marine repairs, maintenance, and installations 850-777-7303 www.davlormarine.webs.com
|
|
|
|
|
Mingo
Group: Forum Members
Last Login: Yesterday @ 5:40:07 PM
Posts: 66,
Visits: 534
|
|
|
|
|
|
Mingo
Group: Forum Members
Last Login: Yesterday @ 5:40:07 PM
Posts: 66,
Visits: 534
|
|
| Thanks. will give that a try
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Today @ 2:37:04 PM
Posts: 1,108,
Visits: 5,579
|
|
actually those have a plastic trim sender cam that breaks all the time,,,, ill bet that is the problem, its mounted right on the tilt tube where the sender is,, we have a replacement part that will not break...
________________________________________________Kenny Mann Almost Anything Computer Owner (co) computer repair and service
Ms Penny Fishing Team video and audio conversions
Emerald Coast Marine vinyl to cd,
4610 Saufley Field Rd
Pensacola, Florida 32526
ph # 850-456-8196
fax# 850-455-8318 Kenny_Mann-ECM@cox.net Sequoiha@cox.net Sales@emeraldcoastmarine.com www.emeraldcoastmarine.com 
|
|
|
|
|
Sailfish
Group: Forum Members
Last Login: 7/6/2009 5:43:22 PM
Posts: 1,210,
Visits: 44,506
|
|
I agree with Kenny. I had one last week, second in six months. Original factory part is plastic. New replacement is metal.
_________________________________________________
Dealer for www.stickitanchorpins.com and Sea Tow Located in Navarre just north of the bridge.
|
|
|
|
|
Ruby Red Lip
Group: Forum Members
Last Login: 12/7/2008 7:49:24 AM
Posts: 19,
Visits: 202
|
|
We have a 21" CC with a single 06' 150 Yamaha four stroke and our trim guage, when first purchased the boat, stated the outboard was trimmed all the way up. Our problem was not the trim sending unit but the plastic collar was broken that the sending unit's arm rides on.
2007 Clearwater 21' CC
|
|
|
|
|
Grouper
Group: Forum Members
Last Login: Today @ 1:41:37 PM
Posts: 673,
Visits: 9,843
|
|
That style trim sender has the collar on the steering tube to adjust. It breaks all the time and has been fixed with a metal collar now. If yours has not been replaced with the metal one, plan on replacing it.
Davlor Marine, LLC mobile marine repairs, maintenance, and installations 850-777-7303 www.davlormarine.webs.com
|
|
|
|